Home > Shop By Brand >

Aspire Atlantis EVO Coil
Aspire Atlantis EVO Coil
Aspire Atlantis EVO Coil


Aspire Atlantis EVO Coil

Our Price: $3.95

Availability: Usually Ships in 24 to 48 Hours
Product Code: ASP-ATL-EVO-COIL

Choose OHM*:


Aspire Atlantis EVO Coil

The Aspire Atlantis EVO replacement coils may look just like normal Atlantis coils at first glance, but when you take a closer look, you’ll start to notice some differences. While the Atlantis EVO coils retain the same vertical coil design as the former Atlantis V2 coils, the coils are wrapped a bit differently, utilizing a Clapton design this time around. The Clapton coils take slightly more power and time to heat up but provides better flavor than the more traditional standard kanthal wrap of the former Atlantis replacement coils. Also, the wicking holes on the Atlantis EVO coils have a lower placement, so the coil wicks ejuice more efficiently than before. The wicking material is the same high-quality organic cotton that you have come to expect from Aspire coils. These coils are available in two different resistances, 0.5 ohm and 0.4 ohm.

Atlantis EVO Coil Options:

  • Atlantis EVO 0.4 ohm Coil – The 0.4 ohm replacement coils are the lowest resistance coil available for the EVO and have a recommended wattage range of 40 – 50 watts. Though these require more power than the 0.5 ohm coil, there is a larger airflow at the base to accommodate that power, making these coils a nice and balanced vape in terms of temperature. That increased power and airflow makes these the coils you’d want if you’re looking for superb vapor production. Recommended for use with 70VG/30PG eJuices.
  • Atlantis EVO 0.5 ohm Coil – The 0.5 ohm replacement coils have a recommended wattage range of 35 – 40 watts, making them the lowest-powered coils of the two. Though the wattage is decreased, these coils also have a smaller amount of airflow. This is going to result in a slightly higher temperature and less vapor. Though it sounds like a downgrade, the flavor is going to be a bit more profound and the vapor will be denser. If you’re a flavor chaser, this will be the coil for you! Recommended for use with 70VG/30PG eJuices.

How to change and prime your coils:

  • First, unscrew the base of the tank from the top of the tank. You want to make sure your tank is empty before doing this.
  • Unscrew the old coil from the base of the tank and throw it away.
  • Apply eJuice to the cotton wicking material inside of the coil. Do this slowly to allow the cotton time to absorb the juice.
  • Continue to do this until the cotton wicking holes on the side of the coil look saturated with juice.
  • Grab a tissue, wrap it around the coil, and give it a few hard shakes to get rid of any excess eJuice in the coil.
  • Screw the new coil into the base of the tank and screw the base back onto the top portion of the tank.
  • You’re ready to fill!

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop By Brand
Replacement Coils
Replacement Coils > Aspire Coils
Shop By Brand > Aspire