Aspire Breeze Coil - 0.6 OHM
The Aspire Breeze replacement coils are made specifically for use with the
Aspire Breeze AIO and Aspire Breeze 2 pod system. The coils utilize Aspire's U-Tech coil technology to improve airflow performance and provide a great tasting vape. The U-Tech airflow is designed in a fashion which allows for the air to enter from near the top, drawn downward on one side of the coil, and then passing back up the other side of the coil to the mouthpiece. This setup allows for a completely contained system that passes the air over the full length of the coils and prevents leaking issues The coils are constructed of a stainless steel chassis, with kanthal heating elements and 100% organic cotton for wicking. All these features will provide a clean flavor with increased vapor production compared to similar sized devices.
The 0.6 Ohm coil is the style that comes included with the Aspire Breeze AIO as well as the Aspire Breeze 2 pod system. This is preferred for higher VG concentration juices focused on great flavor and vapor production. Please note that the 1.2 Ohm Aspire Breeze Coil is what you would want to choose for use with higher milligram strength 50/50 juices.
How to change and prime your coils:
First, remove the mouthpiece section from the Breeze. Then, unscrew and remove the chimney unit. Using the fill hole at the top of the unit, begin to fill with e-juice up to the max fill line seen from the side of the device. Replace chimney unit and mouthpiece and let sit for 5-10 minutes to prime the coil.
Alternately, you can pre-prime the coil by taking the following steps:
- Take a tissue and block off the airflow holes near the top of the coil by pinching the tissue with your fingers over the air flow holes.
- Slowly squeeze juice into the top of the coil until it is a millimeter or two above the top of the wicking material.
- Wait until the juice inlets on the outside of the coil darken with juice, then wrap the entire coil in a tissue and shake the excess juice out of the coil.
- Proceed to install the coil following the procedure described in the “How to change and prime your coils” section.
Advanced User Item. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Vaporleaf Inc. is are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). Vaporleaf Inc. is not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Vaporleaf Inc. will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.