Aspire Cleito Coil

Aspire Cleito Coil

-For the Cleito Tank and the Cleito Pro Tank

Aspire Cleito coils are unusual in the way that the coil itself is essentially the chimney of the tank. This means that the vapor that the coil produces doesn't have to travel quite as far to get to you, which can provide better flavor and a more fulfilling vaping experience. The original Cleito coils consisted of a 0.2 ohm clapton coil, a 0.4 ohm clapton coil, and a 0.4 ohm stainless steel coil. With the more recent introduction of the Cleito Pro tank, we also have two new coils to choose from: a 0.15 ohm mesh coil, and a 0.5 ohm coil.

Staff Recommendation:
Of all the coil options you have with this tank, I personally think the new mesh coil that aspire released is the best. Aspire made larger wicking holes in the coil to ensure that you can chain vape at a fairly high wattage with no issues. The mesh coil gives you the best amount of both flavor and vapor in this tank, and I have gotten an average of a week longer in between coil changes versus any of my other tanks. Also, these coils are compatible with the Aspire Cleito and the Aspire Exo tank.

• 0.2 Ohm Clapton Coil - 55-75 Watts
• 0.4 Ohm Clapton Coil - 40-60 Watts
• 0.4 Ohm Stainless Steel Coil - 55-65 Watts, 450-530F
• 0.15 Ohm Mesh Coil - 60-75 Watts - Vaporleaf Recommended!
• 0.5 ohm Coil - 60-80 Watts



---




How To Prime Your Aspire Cleito Pro Coils:




• Take apart your tank by unscrewing the base of the tank from the top portion and remove your coil from the base of the tank by unscrewing the coil.
• To prime the cotton, start by adding vape juice to the top hole of the coil and then tilt it sideways and roll the coil slowly to allow the juice to saturate throughout.
• You'll know the coil is properly primed when the wicking holes on the sides look completely wet with e liquid. If you added too much liquid you can wrap the coil in a tissue and shake it a few times and then wipe down the outside of the coil.
• Screw the coil into the base of the Cleito Pro Tank
• Replace the glass and top portion of the tank
• Screw the base and top of the tank back together
• You're now ready to fill and vape!



---




How To Prime And Fill Your Aspire Cleito Pro Tank: