Home > Shop By Brand >

SMOK TFV8 Baby Beast Coil
SMOK TFV8 Baby Beast Coil
SMOK TFV8 Baby Coil

Alternative Views:

SMOK TFV8 Baby Coil

Our Price: $4.95

Availability: Usually Ships in 24 to 48 Hours



SMOK TFV8 Baby Beast Coil

SMOK TFV8 Baby Q2 - 0.4 OHM:
The Q2 0.4 ohm coil is a big single core coil, with a recommended wattage range of 55-65 watts, providing impressive vapor production and a lot of airflow. The amount of airflow also means that it's a relatively cool vaping experience that's on the lighter side for flavor.

  • Single Core
  • Dual Coil
  • 0.4 OHM
  • 40W-80W / Best at 55-65 Watts

SMOK TFV8 Baby Q2 - 0.6 OHM:
The lowest wattage coil available for SMOK Baby tanks. Single core like the 0.4 ohm Q2 coil, but with a smaller internal diameter, providing a tighter airflow which allows for better flavor at lower wattage. This coil gives you a relaxed vape with less intense vapor production and also helps to save battery by running at a lower power level.

  • Single Core
  • Dual Coil
  • 0.6 OHM
  • 20W-50W / Best at 30-40W

SMOK TFV8 Baby T6:
The triple core Baby T6 coil is the highest wattage coil available for the Baby Beast. With a recommended best wattage range of 70 to 90 watts, you get a huge cloud with impressive flavor. If you want to get the most vapor production possible out of your Baby Beast tank, this coil is the way to go. Keep in mind that smaller vapes will go through quite a lot of battery running the wattage this high, so a higher capacity built-in battery mod or a dual 18650 box mod is recommended for use with this coil.

  • Triple Core
  • Sextuple Coil
  • 0.2 OHM
  • 40-130W / Best at 70-90W

SMOK TFV8 Baby T8:
The baby T8 has eight coils in four cores, with each coil being a little bit smaller than the ones in the T6 coil. This means that you still get a ton of vapor production, but the flavor is more intense than the T6 because there's more surface area and less airflow. We recommend this coil to be used at 75 watts with your tank's airflow halfway open and your favorite 70/30 vape juice for the best experience. It's a fantastic balance of heat, flavor and vapor production!

  • Quadruple Core
  • Octuple Coil
  • 0.15 OHM
  • 50-110W / Best at 60-80W

SMOK TFV8 Baby X4:
The dual core Baby X4 coil is among the tighter airflow baby beast coils, best for those that want to use lower wattage but still want a good amount of vapor production and flavor. With a recommended best wattage range of 45 to 60 watts, it's a great fit for those using single 18650 and smaller built-in battery box mods.

  • Dual Core
  • Quadruple Coil
  • 0.15OHM
  • 30-70W / Best at 45-60W

SMOK TFV8 Baby Mesh:
Smok finally has mesh coils! This is another Baby Prince style coil which is more stylized than the Baby Beast coils but still fits the same. This is a traditional style mesh coil, meaning its woven metal instead of a notch-style coil. Mesh provides amazing flavor, despite the fact that big single core coils like this tend to be more on the airy side. The slightly higher recommended best wattage range means that it's a little warmer and more flavorful than the similar 0.4 ohm Q2 coil, and it produces a slightly larger vapor cloud.

  • Single Core
  • 0.15ohm
  • 40-80W / Best at 60-70W

SMOK TFV8 Baby Q4 - 0.4 OHM:
This is another Baby Prince coil, which is more stylized than the standard Baby Beast coils, but still fits in the Baby tanks just the same. This is the big brother to the Baby Q2 coils being a big single core, but this one has a total of 4 coils stuffed into it. More metal means more wattage, so turn up the power and enjoy the highest wattage single core coil available for the Baby Beast tanks! If you want big clouds but you like the wide-open airflow of the single core coils, this is the one for you.

  • Single Core
  • Quadruple coils
  • 0.4 Ohm
  • 30-65W / Best: 50-60W

How to Prime your Baby Beast Coils:

  • First, unscrew the base of the tank. If you currently have juice in your tank, turn the tank upside-down first.
  • Unscrew the coil from the base of the tank.
  • Apply your favorite vape juice to the cotton wick inside of the coil. Do this slowly, allowing the juice to soak into the cotton wick as you go.
  • When the wick holes on the outside of the coils look wet and saturated, the coil is fully primed.
  • Wrap a tissue around the coil and give it a few good shakes to remove any excess juice from the coil.
  • Screw the coil back into the base of the tank.
  • Screw the tank back together.
  • Now you're ready to fill!


You may also like...
SMOK TFV8 Baby Beast Coil M2 SMOK TFV8 Big Baby Beast Replacement glass SMOK Stick Prince Baby Kit SMOK Stick V8 Kit
Our Price: $4.95
Our Price: $5.95
Our Price: $36.95
Our Price: $33.95
SMOK TFV8 Baby Beast Coil M2 SMOK TFV8 Big Baby Beast Replacement glass SMOK Stick Prince Baby Kit SMOK Stick V8 Kit
SMOK TFV8 Baby Beast V8 Baby RBA
Sale Price: $7.95
SMOK TFV8 Baby Beast V8 Baby RBA

Average Customer Review: 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
August 23, 2018
Reviewer: Richard Adams from Denver, CO United States  

Was this review helpful to you?

Browse for more products in the same category as this item:

Shop By Brand
Replacement Coils
Replacement Coils > SMOKtech Coils
Shop By Brand > SMOKtech