Home > Shop By Brand >

SMOK TFV8 Baby V2 Coil
SMOK TFV8 Baby V2 Coil
SMOK TFV8 Baby V2 Coil


SMOK TFV8 Baby V2 Coil

Our Price: $4.95

Availability: Usually Ships in 24 to 48 Hours
Product Code: SMOK-BABY-V2-COIL

Choose OHM*:


SMOK TFV8 Baby V2 Coil


With the TFV8 Baby V2, SMOK has given their TFV8 Baby line of tanks a complete rework. Utilizing a line of entirely new mesh coils, the Baby V2 is going to require a whole lot more power than the TFV8 Baby Beast and TFV12 Baby Prince. The Baby V2 is capable of going as high as 130 watts with the V2-A1 coil and bottoms out at 65 watts with the V2-A2 coil, which is still a higher wattage than a lot of the older Baby Beast coils were capable of. The third coil available, the V2-A3, is solidly on the high-powered end of things as well, with a recommended wattage of 100-120 watts. Whereas the Baby Beast was solidly in the medium power range, as you can tell, the Baby V2 is aiming to be more of a high powered sub-ohm tank.

Staff recommendation:
If the standard mesh coils are a bit too powerful for you, or if you just prefer the taste of more conventional coils, SMOK does make lower-powered kanthal coils for the Baby V2, but you may have to put some effort into seeking them out as they aren't very popular. Also, please keep in mind that you cannot use previous Baby Beast coils in this tank, nor can you use Baby V2 coils in other Baby tanks. - Ian

Baby V2-A1, 0.17ohm single coil, has a big hole inside in which you can see a large piece of mesh covering the cotton. The design is simple yet has an unprecedented excellent effect. You can feel faster heating process and greater taste.

Baby V2-A2, 0.2ohm dual coil, coil has two holes inside and both of the holes have cobra mesh coverage. This design can help to bring more airflow and offer you massive vapor.

Baby V2-A3, 0.15ohm triple coil, has three separate heating coils inside, combining with 3 larger airflow slots at the bottom of the tank, more air can be straightly brought in. When you fire to vape, three coils will heat simultaneously, which can bring you unprecedented huge and thick vapor!

ANTIBACTERIAL MEDICAL COTTON - The new tank also uses antibacterial medical cotton, the best replacement of the former organic one. This kind of medical cotton is better and can reduce the amount of bacteria.


How To Prime Your SMOK TFV8 Baby V2 Coils:

  • Unscrew the base of the tank from the top of your tank.
  • Now that the coil is exposed, unscrew the coil from the base of your tank.
  • With the coil out, slowly apply juice to the cotton wicking material on the inside of the coil until the cotton looks evenly and thoroughly saturated.
  • If you applied too much juice to the coil, go ahead and wrap your coil in a paper towel or tissue and give it a few hard shakes to get rid of that excess juice.
  • With your coil primed, you can now screw the coil back into the base of your tank.
  • Screw base with the coil attached back onto the top portion of your tank.
  • Your coil is now primed and you're ready to fill!

How To Prime And Fill Your SMOK TFV8 Baby V2 Tank:

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop By Brand
Replacement Coils
Replacement Coils > SMOKtech Coils
Shop By Brand > SMOKtech