Home > Shop By Brand >

Smoktech Nord Replacement Pod with Coils
Smoktech Nord Replacement Pod with Coils
Smoktech Nord Replacement Pod with Coils


 

Smoktech Nord Replacement Pod with Coils

Our Price: $9.95


Availability:: Usually Ships in 24 to 48 Hours
Product Code: SMOK-NORD-POD-COILS
Qty:

Description
 

Smoktech Nord Replacement Pod with Coils

The SMOK Nord Replacement Coil and Pods are designed for the Smoktech Nord Pod System Kit.


The SMOK Nord, one of the more recent pod vapes that SMOK has put out, is a pod vape with a twist. The SMOK Nord utilizes interchangeable coils rather than disposable pods, with a few different coils to choose from. At the time of writing, there are three coils available. One of the coils is about what one would expect from a pod vape, which is a 1.4 ohm kanthal coil made for use with nicotine salt vape juice.

The other two coils are where the Nord begins to stand out from the crowd. There are two sub-ohm coils available for use with the Nord: a 0.8 ohm MTL mesh coil, and 0.6 ohm DTL mesh coil, making the SMOK Nord the first pod vape to offer mesh coils. Aside from the mere fact that it uses mesh coils, it's also one of few pod vapes to offer coils that suit such a variety of draw styles.

If you prefer MTL draws and nicotine salt, you can use the 1.4 ohm coil. If you want a bit more flavor and juice with a bit less nicotine but still want a MTL draw, you can use the 0.8 ohm mesh coil. If you're chasing clouds, the 0.6 ohm mesh coil offers some impressive cloud production for a pod vape and wicks fast enough to handle thicker vape juice.

The Nord pod has a 3ml capacity, which is on the higher end as far as pod vapes go. The juice fill port is located underneath a rubber plug found on the side of the pod. On the bottom of the pod is a hole for the coil. The coils aren't threaded, so you simply push the coil into place, rather than screw the coil in.

Staff Recommendation
If you plan on using nicotine salt vape juice, stick with the 1.4 ohm coil or, possibly, the 0.8 ohm coil. Don't use the 0.6 ohm coil with nicotine salts. I made that mistake on my first day with the Nord and it was an unpleasantly harsh experience. Nicotine salt goes down smoother with the other coils. Also, though it seems slightly backwards, the 0.6 ohm coil is one of the few pod vape coils that actually works well with 70/30 vape juice, so if you're noticing some leaking when using 50/50 juice with the 0.6 ohm coil, try some thicker vape juice. - Ian

Includes:

  • x1 Nord Replacement Pod
  • x1 Mesh - 0.6ohm Coil
  • x1 Standard - 1.4ohm Coil

How to prime the SMOK Nord coil:
Pcitures coming soon!

  • Remove the pod from the body of the device.
  • If there is already juice and a coil in your pod, empty the pod as well as you can by pulling open the rubber plug and flicking the juice into a sink or trash can. Keep some tissues handy as there will most likely still be some juice in the pod.
  • Turn your pod upside down and pull the coil out of the pod. If you don't have a coil installed already, then just ignore this step.
  • With your new coil, apply juice to the cotton wicking material inside of the coil by putting some juice down the center chimney of the coil. Do this until the cotton windows on the outside of the coil appear wet.
  • With that done, we can install the coil.
  • Locate the hole on the bottom of the pod, line the flat sides of the coil up with the flat walls closest to the hole, and push the coil in.
  • Now you're ready to fill!

How to fill the SMOK Nord pod:
Pictures coming soon!

  • With the pod removed from the device, locate the silicone plug on the side of the pod.
  • Lift the silicone plug up from the side that the arrow on the plug is pointing to. If your finger nails aren't quite long enough, you can use a small tool of some sort to lift it.
  • Now that the fill hole is exposed, fill your juice through the hole.
  • Push the silicone plug back into place.
  • Reattach the pod to the device.
  • If you primed your coil, turn your device on with five quick consecutive button presses, then you're ready to vape!
  • If you didn't prime your coil, allow the full pod to sit with the coil in it for five minutes. This will give the cotton in the coil time to fully absorb the juice.
  • Turn the Nord on with five quick consecutive button presses.
  • You're ready to vape!

How To Prime And Fill Your SMOK Nord Pod Vape:
Video coming soon!

You may also like...
SMOK Nord Pod System Kit
Our Price: $34.95
SMOK Nord Pod System Vape Kit
Blueberry Granola Bar by YOGI - 35mg NIC SALT - 30ml Bottle
Our Price: $21.95
Blueberry Granola Bar by YOGI - 35mg NIC SALT - 30ml Bottle
No. 32 by Beard Vape Co. - 30mg NIC SALT - 30ml Bottle
Our Price: $21.95
No. 32 by Beard Vape Co. - 30mg NIC SALT - 30ml Bottle
SMOK Nord Replacement Coil
Our Price: $3.95
SMOK Nord Replacement Coil
O.G. Bubba by Okami - 50mg NIC SALT - 30ml Bottle
Our Price: $21.95
O.G. Bubba by Okami - 50mg NIC SALT - 30ml Bottle
Pudding by The Milkman - 40mg NIC SALT - 30ml Bottle
Our Price: $21.95
Pudding by The Milkman - 40mg NIC SALT - 30ml Bottle
Really Berry by Naked 100 - 35mg NIC SALT - 30ml Bottle
Our Price: $21.95
Really Berry by Naked 100 - 35mg NIC SALT - 30ml Bottle

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop By Brand
Replacement Coils
Shop By Brand > SMOKtech
Replacement Coils > SMOKtech Coils