Home > Shop By Brand >

UWELL Valyrian Coils - 2 pack
UWELL Valyrian Coils - 2 pack
UWELL Valyrian Coils - 2 pack


 

UWELL Valyrian Coils - 2 pack

Our Price: $9.95


Availability: Usually Ships in 24 to 48 Hours
Product Code: U-WELL-VLYRN-COILS


Choose OHM*:


Qty:  
Description
 

UWELL Valyrian Coils - 2 pack


The Uwell Valyrian replacement coils don’t offer a lot in terms of variety, like the Uwell Crown line of tanks do, but what they lack in variety they make up for in sheer power, flavor, and vapor production. The Uwell Valyrian only has one coil option, the 0.15 ohm coil you see on this page, but that doesn’t mean you can’t customize your experience. Not only does it have a large wattage range, from 95 watts all the way up to 125 watts, but the Valyrian tank comes with different coil pins in the box, allowing you to swap the pins out depending on the experience you desire. There is a spiral pin designed for flavor chasers, an unrestricted pin for the cloud-focused vapers among us, and a wavy pin that was designed for a balance of both. So, while it may look restricting only having one coil to choose from, that isn’t the case. Uwell has tried to make this coil as perfect as possible, while allowing other ways to customize your experience. We recommend using higher VG eJuices with these coils to avoid leaking issues.

One thing to make note of is that despite the coil showing a recommended wattage of 95 watts to 120 watts, the pin that you use will impact your airflow, therefore the recommended wattage range will change depending on the pin you use. The recommended wattage range of each pin is as follows:

  • Spiral Pin (Flavor focused): 95 – 105 watts.
  • Unrestricted Pin (Cloud focused): 100 – 120 watts.
  • Wave Pin (Balanced): 100 – 120 watts.


How to change and prime your coils:

  • First, unscrew the base of the tank from the top of the tank. You want to make sure your tank is empty before doing this.
  • Unscrew the old coil from the base of the tank and throw it away.
  • Apply eJuice to the cotton wicking material inside of the new coil. Do this slowly to allow the cotton time to absorb the juice.
  • Continue to do this until the cotton wicking holes on the side of the coil look saturated with juice.
  • Grab a tissue, wrap it around the coil, and give it a few hard shakes to get rid of any excess juice in the coil.
  • Screw the coil back into the base of the tank and screw the base back onto the top portion of the tank.
  • Now you're ready to fill!

Coils sold in 2 pack.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop By Brand
Shop By Brand > UWELL
Replacement Coils
Replacement Coils > Uwell Coils