eLeaf iCare 2 Pod System Starter Kit
The iCare 2 features an exquisite rubber paint finish, giving you a softer and smoother feel in hand than ever. Equipped with a removable 2ml tank and an internal 650mAh battery, the iCare 2 is another ultra compact e cigarette starter kit. By using a higher strength e-liquid, the iCare 2 includes the new IC 1.3ohm Coil which perfectly recreates the sensation you are accustomed to with traditional cigarettes.
The eLeaf iCare 2 Starter Kit Includes:
- 1x 650mAh iCare 2 Battery
- 1x 2ml iCare 2 Pod
- 2x IC 1.3ohm Coil
- 1x Micro USB Cable
- 1 User Manual
eLeaf iCare 2 Starter Kit Review:
An inexpensive and simple way to get into the world of vaping and get yourself away from cigarettes or as a small and stealthy vape to carry around with you throughout the day.
Clocking in at only 86mm x 13mm x 31mm, the iCare 2 is a seriously small electronic cigarette, but packed into that tiny device is a 650 mAh battery that should last you most of a day if you're using high nicotine strength e-liquid in it. It also has a rubberized finish, that allows you to hold on to the device with a decent grip, making it easy to handle despite the small size.
Rather than changing out a pod, like you would with most devices this size, the iCare 2 uses coils within the pod, allowing you to just change out the coil, reducing it's impact on your wallet and the environment. The pod holds 2ml of e-liquid, which should see you through the day.
Small and inexpensive, while still offering decent battery life, great flavor, and good build quality, this is a perfect way to get into vaping for anyone, including those on a budget. It also makes a great cheap second device to use while you are on the go, so you don't have to carry your heftier setup around with you.
How To Fill the eLeaf iCare 2 Pod:
- The cartridges in this kit are empty without a coil.
- Please insert a coil and purchase e-liquid or fill with your favorite e-juice.
- First, pull the pod out of the battery.
- Pull the bottom part of the pod off and screw in the coil. Replace the bottom part of the pod securely.
- Next, pull off the mouth-piece of the pod system.
- Look down at the top of the pod and you will see 2 silicone lined holes on both sides. That is where you fill the liquid into.
- Place the tip of the ejuice dropper or nipple of the ejuice bottle and squeeze until the pod is full.
- Finally, replace the mouth-piece of the pod. Insert the pod back into the battery and active the battery to use.
How to Activate the eLeaf iCare 2 Battery.
- Safety switch prevents the battery from activating.
- Rapidly press the switch 5 times in under one second to activate.
- Then press and hold the switch to vape.
- Rapidly press 5 more times to de-activate.
Rechargeable Battery Warning. Use At Your Own Risk!
NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. Vaporleaf Inc. is are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making).
Vaporleaf Inc. is not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use.
Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible.
Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Vaporleaf Inc. will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries. Please have a basic understanding of the batteries you are using and how to care for them properly.
HOW TO USE YOUR iCARE 2 POD SYSTEM VIDEO: