eLeaf iStick Pico Resin Mod
**Colors vary as each one is completely unique**
Eleaf iStick Pico 75W TC by Jay Bo Designs
The Eleaf iStick Pico is the newest mod to join the vaunted Eleaf family, featuring a design overhaul guided by Jay Bo Designs to produce one of the most compact 18650 platforms with the capability to fire up to 75W and the integration of sophisticated temperature control that features Ni200 Nickel, Titanium, and Stainless Steel heating elements alongside full TCR control. The iStick Pico features one of the most compact 18650 platforms measuring at 45mm by 23mm by 70.5mm coupled with incredible range and versatility as compared to it's size. The iStick Pico has a power output range of 1 to 75W with a 0.1 to 3.5 ohm atomizer resistance range alongside a sophisticated temperature control output that has onboard support for Ni200 Nickel, Titanium, and Stainless Steel heating elements. The Pico also integrates a three memory TCR mode that allows for even greater precision and control. With an emphasis on creating one of the most ergonomic and well balanced chassis designs to date, the Eleaf iStick Pico features a top loaded battery cap that allows the fitment of 18650 batteries, with the cap extending one half of the overall height by 5.5mm. The control face measures an incredible 65mm in height from base to 510, achieved by moving the up and down adjustment buttons into a recess located in the base. The iStick Pico features a full sized OLED screen that displays output wattage, output temperature, atomizer resistance, and battery life.
iStick Pico 75W TC Features:
1 to 75W Power Output
0.1 to 3.5 ohm Atomizer Resistance Range
Bypass Mode Feature
Full Temperature Control Output
Ni200 Nickel Support
Stainless Steel Support
Three Memory TCR Mode
Set Own Temperature Coefficient of Resistance
Fine Tune Output
0.05 to 1.5 ohm Atomizer Resistance Range
200 to 600 degrees Fahrenheit Range
Ultra Compact Form Factor
45mm by 23mm by 70.5mm
Two Line OLED Screen
Battery Life Indicator
Battery Not Included
Three Button Operation
Bottom Button Adjustment
Spring Loaded 510 Connection
Micro USB Charge Port
Advanced User Item. Use At
Your Own Risk!
NOTE: There is an inherent risk with the use of any and all
rechargeable batteries in any circumstance. Vaporleaf Inc. is are not
responsible for damage if there is any modification of the batteries/chargers
in any form or shape (including pack making). Vaporleaf Inc. is not responsible
for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion),
LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
Use special caution when working with Li-ion (Lithium-ion),
LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very
sensitive to charging characteristics and may explode or burn if mishandled.
Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo
(Lithium-ion Polymer) and any rechargeable cells in charging, discharging,
assembly and storage before use. Always charge in/on a fire-proof surface.
Never leave charging batteries unattended. Do not use any rechargeable battery
as well as any battery charger if any visible damage is present, as well as if
the cell or charger has been stressed through mishandling, accidental or
otherwise, even if damage may not be visible. Always store and transport
rechargeable cells in a safe, non-conductive container in a controlled
environment. Dispose of all battery cells and chargers in accordance to local
laws and mandates.
Vaporleaf Inc. will not be held responsible or liable for
any injury, damage, or defect, permanent or temporary that may be caused by the
improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any
rechargeable battery/batteries. Please have a basic understanding of the
batteries you are using and how to care for them properly.